Difference between revisions of "@pnutPrinter"
m |
m (→Hardware) |
||
| Line 9: | Line 9: | ||
The printer is run by a Raspberry Pi attached to a receipt printer and a webcam, with a light. | The printer is run by a Raspberry Pi attached to a receipt printer and a webcam, with a light. | ||
| − | The light | + | The light turns on when the room is too dark, shown here: https://beta.pnut.io/@33MHz/posts/688180. |
The actual printer: https://www.amazon.com/gp/product/B011KF6GW4. | The actual printer: https://www.amazon.com/gp/product/B011KF6GW4. | ||
Latest revision as of 20:36, 23 October 2019
@pnutPrinter is a 58mm receipt printer that will print and then take a picture and post the text of posts with the #pnutPrinter tag.
Immortalize your post by tagging it with #pnutPrinter.
Lines are 18 characters wide. Ending with "*" will preserve white space. (Think: ASCII art.)
Contents
Hardware
The printer is run by a Raspberry Pi attached to a receipt printer and a webcam, with a light.
The light turns on when the room is too dark, shown here: https://beta.pnut.io/@33MHz/posts/688180.
The actual printer: https://www.amazon.com/gp/product/B011KF6GW4.
An early prototype of the Python code: https://gist.github.com/33mhz/69ca1a6a01093754aeb59f6bcb4236b5. It has since been rewritten in PHP using websocket/"streams".
Commands
Tag a post with #pnutPrinter. If posting ASCII art, end the post with an asterisks (*) and limit your art to a width of 18 characters.
